30" x 30" Floor Door with 1/8" Recess for Vinyl Tile/Carpet
The Best Access Doors Canada FT series aluminum floor access doors are designed for interior and exterior applications that require an access opening that will blend in with the surrounding floor material. The BA-FT-8040 is recessed 1/8" to accommodate carpeting and vinyl tile.
Note: This is a Special Order product
• Designed for interior and exterior applications that require an access opening that will blend in with the surrounding ﬂoor material
• Recessed 1/8" to accommodate carpeting and vinyl tile.
• Door panel is equipped with a ﬂush aluminum drop handle and an automatic hold open arm
BA-FT-8040 Floor Door Speciﬁcations:
• Material: Aluminum door and frame
• Door: 1/4" smooth aluminum plate reinforced for live load of 150 pounds/sq. ft. Extruded edging is welded to door panel, providing a 1/8" recess
• Frame: Angle frame fabricated from aluminum extrusion with integral 1" anchor ﬂange on three sides and welded anchor straps on the hinge side
• Hinge: Extruded aluminum hinges are welded to inside of door panel and pivot on stainless steel pins. Hold open arm with red Vinyl grip allow automatic opening
• Opening Device: Door panel to open to 90 degrees, locking door in open position, and allowing for easy control when closing door panel. Stainless steel torsion bars provide lift assistance
• Standard Latch: Stainless steel slamlock with a ﬁxed inside handle, removable outside handle, and removable threaded plug
• Finish: Mill ﬁnish with bituminous coating applied to exterior of frame